Recording with the sequential switcher, Connection with the sequential switcher, Timing for camera switching – Toshiba kV-9960A User Manual
Page 38
NOTICE
PREPARATION
INTRODUCTION
RECORDING
OPERATION
PLAYBACK
OPERATION
RECORDING WITH THE SEQUENTIAL SWITCHER
This VCR can work with a sequential switcher connected for recording.
Connection with the Sequential Switcher
For detailed operations and connections of the switcher, consult the Instruction Manual of the sequential switcher.
Timing for Camera Switching
In case of using the sequential switcher for 4 channels (and recording for
EP
A18 mode);
0.05 s
camera
D
0.05 s
camera
C
0.05 s
camera
B
0.05 s
camera
A
A
B
C
D
A
B
C
D
Video track
Vertical synchronization
Notes:
i
Each time a video track is recorded, the video camera is automatically switched by the position of the vertical synchroniza-
tion signal.
i
The video camera switching time differs according to the time mode.
i
Record/playback picture is snowy or noisy when operating with a B/W multiplex or B/W quad, please select the VIDEO
MODE switch to B/W mode. (See page 5.)
i
In
EP
A18 record mode, quick response switcher is necessary.
37
Sequential
switcher
To REC trigg. out
To trigger input
To trigger grounding
To GND