Toshiba kV-9960A - Manual (Page 27)

RECORDING OPERATION
PREPARATION
INTRODUCTION
PLAYBACK OPERATION
NOTICE
26
IF A POWER FAILURE SHOULD OCCUR
i If a power failure occurs, the PW.FAIL display appears
in the VCR display. To erase this display press one of
the operations buttons.
i If the power failure is recovered within 10 days, and the
battery is charged continuously for more than 48 hours
in the ambient temperature, the date/time data and
timer recording programs remain in the memory.
EXT ON 120
SU2 ON -:--- -:--- 120
SU1 ON -:--- -:--- 120
SA2 ON -:--- -:--- 120
SA1 ON -:--- -:--- 120
DLY ON 8:30 5:00 A24
PROGRAM
FR1 ON -:--- -:--- 120
MENU=[DISPLAY]
FR2 ON -:--- -:--- 120 ➜
➜
➜
➜
➜
➜
➜ SP
SP
SP
SP
SP
SP
SP
SP
AM PM
Notes:
i
If the TIMER button is pressed at the moment between
start time and end time, recording starts immediately.
i To cancel the timer recording, press the TIMER button.
i The timer recording starts 10 seconds before the record
start time.
i When the end time is set to a time earlier than the start time, the
recording is carried out up to the end time in the next day.
i The time difference between start time and end time
should be more than 1 minute. If they are same, timer
recording doesn’t work.
i The accuracy of the time display depends on the condi-
tions of use and the environment. Set clock to the exact
time by daily check.
i
During timer power off mode, alarm recording will not
operate at all.
During the 12 hour display, the display appears as follows.
EXT ON 120
SU2 ON --:-- --:-- 120
SU1 ON --:-- --:-- 120
SA2 ON --:-- --:-- 120
SA1 ON --:-- --:-- 120
DLY ON 8:30 17:00 120
PROGRAM
FR1 ON --:-- --:-- 120
MENU=[DISPLAY]
FR2 ON --:-- --:-- 120 ➜
➜
➜
➜
➜
➜
➜ SP
SP
SP
SP
SP
SP
SP
SP
8 Press the SHIFT
button and the + SET
button to set recording
time mode to
SP A24.
DISPLAY TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
7 Press the SHIFT
button to blink end time.
Set end time to 17:00
with the SET button and
the SHIFT button in
the same manner as 6.
DISPLAY TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
EXT ON 120
SU2 ON --:-- --:-- 120
SU1 ON --:-- --:-- 120
SA2 ON --:-- --:-- 120
SA1 ON --:-- --:-- 120
DLY ON 8:-- --:-- 120
PROGRAM
FR1 ON --:-- --:-- 120
MENU=[DISPLAY]
FR2 ON --:-- --:-- 120 ➜
➜
➜
➜
➜
➜
➜ SP
SP
SP
SP
SP
SP
SP
SP
6 Press the + or – SET
button and the SHIFT
button to set start time to
8:30.
DISPLAY TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
EXT ON 120
SU2 ON --:-- --:-- 120
SU1 ON --:-- --:-- 120
SA2 ON --:-- --:-- 120
SA1 ON --:-- --:-- 120
DLY ON 8:30 --:-- 120
PROGRAM
FR1 ON --:-- --:-- 120
MENU=[DISPLAY]
FR2 ON --:-- --:-- 120 ➜
➜
➜
➜
➜
➜
➜ SP
SP
SP
SP
SP
SP
SP
SP
i The power goes off and the TIMER display lights in the
VCR display.
i Recording starts at the programmed start time.
10 Press the TIMER button.
DISPLAY TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
9 Press the DISPLAY
button twice to erase the
MENU screen.
17:30:02 A 2
8/28/97 THU
SP
i The TIME MODE button is pressed, the display
changes as follows.
SP 120
→
120
→
SP 168
→
168
→
SP 240
→
240
→
SP 480
→
480
→
SP 720
→
720
→
SP 960
→
960
→
SP L01
→
SP L02
→
SP L03
→
SP A2
→
A6
→
SP A12
→
A18
→
SP A24
→
SP 24
→
30
→
SP 48
→
48
→
SP 72
→
72
→
SP 120
i The TIME MODE button is pressed, the display
changes in the reverse direction.
EXT ON 120
SU2 ON --:-- --:-- 120
SU1 ON --:-- --:-- 120
SA2 ON --:-- --:-- 120
SA1 ON --:-- --:-- 120
DLY ON 8:30 17:30 120
PROGRAM
FR1 ON --:-- --:-- 120
MENU=[DISPLAY]
FR2 ON --:-- --:-- 120 ➜
➜
➜
➜
➜
➜
➜ SP
SP
SP
SP
SP
SP
SP
SP
EXT ON 120
SU2 ON --:-- --:-- 120
SU1 ON --:-- --:-- 120
SA2 ON --:-- --:-- 120
SA1 ON --:-- --:-- 120
DLY ON 8:30 17:00 A24
PROGRAM
FR1 ON --:-- --:-- 120
MENU=[DISPLAY]
FR2 ON --:-- --:-- 120 ➜
➜
➜
➜
➜
➜
➜ SP
SP
SP
SP
SP
SP
SP
SP
REC
H
SP
TIMER
TIMER