Toshiba kV-9960A - Manual (Page 36)

NOTICE
PREPARATION
INTRODUCTION
RECORDING OPERATION
PLAYBACK
OPERATION
The VCR can be programmed to automatically rewind the tape when the tape reaches its end.
How to Set to Auto Rewind at End of Tape
35
1 Press the DISPLAY
button.
Note:
i
Alarm recording does not operate during auto-rewind.
2 Press the or SHIFT
button to blink SETUP
and press the + SET
button.
3 Press the or SHIFT
button to blink TAPE
END MODE.
4 Press the + or – SET
button to select REW
→
STOP.
5 Press the DISPLAY
button twice to erase the
display.
i When tape end is detected during recording, the tape
automatically rewinds and stops at beginning of the tape.
Caution:
If you need the VCR to Auto Rewind even if an alarm condi-
tion occurred then set TAPE END ALARM to “CONT.” in the
MENU SCREEN.
M E N U
CLOCK ADJUST
SETUP
SETUP
DISPLAY MODE
END=[DISPLAY]
PROGRAM
ALARM RECALL
TIME DATE SEARCH
M E N U
CLOCK ADJUST
SETUP
DISPLAY MODE
END=[DISPLAY]
PROGRAM
ALARM RECALL
TIME DATE SEARCH
RESTART REC OFF
TAPE END MODE STOP
ALARM STOP
S E T U P
ALARM REC TIME 15S
MENU=[DISPLAY]
SPEED A 2 SP
17:30:02 A 2
8/28/97 THU
SP
DISPLAY TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
DISPLAY TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
DISPLAY TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
DISPLAY TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
DISPLAY TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
RESTART REC OFF
TAPE END MODE REW STOP
ALARM STOP
S E T U P
ALARM REC TIME 15S
MENU=[DISPLAY]
SPEED A 2
➜
SP