Toshiba kV-9960A - Manual (Page 37)

RECORDING OPERATION
PREPARATION
INTRODUCTION
PLAYBACK OPERATION
NOTICE
The VCR can be programmed to automatically restart recording when the tape reaches its end. With this function, the VCR will
automatically rewind the tape and begin recording.
36
How to Set to Repeat Record at End of Tape
1 Press the DISPLAY
button.
2 Press the or SHIFT
button to blink SETUP
and press the + SET
button.
3 Press the or SHIFT
button to blink TAPE
END MODE.
4 Press the + or – SET
button to select REW
→
REC.
5 Press the DISPLAY
button twice to erase the
display.
Notes:
i When the VCR is working in repeat recording, make sure to carry out daily checks.
i Alarm recording does not operate during auto-rewind.
i When tape end is detected during recording, the VCR
automatically rewinds the tape and goes to recording
mode at beginning of the tape.
Caution:
If you need the VCR to repeat record even if an alarm condi-
tion occurred then set TAPE END ALARM to “CONT.” in the
MENU SCREEN.
i Now the Repeat Recording
Setting is completed.
M E N U
CLOCK ADJUST
SETUP
SETUP
DISPLAY MODE
END=[DISPLAY]
PROGRAM
ALARM RECALL
TIME DATE SEARCH
M E N U
CLOCK ADJUST
SETUP
DISPLAY MODE
END=[DISPLAY]
PROGRAM
ALARM RECALL
TIME DATE SEARCH
RESTART REC OFF
TAPE END MODE STOP
ALARM STOP
S E T U P
ALARM REC TIME 15S
MENU=[DISPLAY]
SPEED A 2 SP
17:30:02 A 2
8/28/97 THU
SP
RESTART REC OFF
TAPE END MODE REW REC
ALARM STOP
S E T U P
ALARM REC TIME 15S
MENU=[DISPLAY]
SPEED A 2
➜
SP
DISPLAY TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
DISPLAY TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
DISPLAY TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
DISPLAY TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
DISPLAY TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –