Toshiba kV-9960A - Manual (Page 35)

RECORDING OPERATION
PREPARATION
INTRODUCTION
PLAYBACK OPERATION
NOTICE
OPERATION AFTER TAPE END DETECTION
The VCR can be programmed to respond differently when the tape reaches its end. The following describes how to set the different
modes of operation.
34
How to Set to Stop at End of Tape
1 Press the DISPLAY
button.
2 Press the or SHIFT
button to blink SETUP
and press the + SET
button.
3 Press the or SHIFT
button to blink TAPE
END MODE.
4 Press the + or – SET
button to set the opera-
tion after tape end
detection.
i Each time the + SET button is pressed, the display
changes as follows.
STOP
→
(REW
→
STOP)
→
(REW
→
REC)
i Each time the – SET button is pressed, the display
changes in the reverse order.
Operation after detection of tape end
Stops at tape end.
Rewinds to beginning of tape and stops.
Set to carry out repeat recording.
Rewinds to beginning of tape and records.
Display
STOP
REW
→
STOP
REW
→
REC
M E N U
CLOCK ADJUST
SETUP
SETUP
DISPLAY MODE
END=[DISPLAY]
PROGRAM
ALARM RECALL
TIME DATE SEARCH
M E N U
CLOCK ADJUST
SETUP
DISPLAY MODE
END=[DISPLAY]
PROGRAM
ALARM RECALL
TIME DATE SEARCH
RESTART REC OFF
TAPE END MODE STOP
ALARM STOP
S E T U P
ALARM REC TIME 15S
MENU=[DISPLAY]
SPEED A 2 SP
RESTART REC OFF
TAPE END MODE STOP
ALARM STOP
S E T U P
ALARM REC TIME 15S
MENU=[DISPLAY]
SPEED A 2 SP
DISPLAY TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
DISPLAY TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
DISPLAY TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
DISPLAY TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
Caution:
If you need Auto Rewind function even for the case that alarm recording starts during recording, please set TAPE END ALARM to
“CONT.” in the MENU SCREEN.
Note:
i The buzzer, screen display and counter displays operate as follows depending on the setting for operations after tape end
detection.
Setting contents
STOP
REW
→
STOP
REW
→
REC
Buzzer
Buzzer sounds at tape end
Buzzer sounds at tape top
Screen display
TAPE END blinks
TAPE END blinks
Counter display
Counter display blinks
Counter display blinks