Recommended paper, Handling and storing paper – Toshiba E-STUDIO 850 User Manual
Page 38
36
1.BEFORE USING EQUIPMENT
4.Setting Copy Paper (Cont.)
1
Toshiba-recommended paper / Handling and storing paper
Recommended paper
To make copies with a fine image, the following types of paper are recommended.
If you wish to use copy paper other than the recommended types, consult your service technician.
*
Only Toshiba-recommended OHP film should be used. Using any other film may cause a malfunction.
Handling and storing paper
Pay attention to the following points:
•
Avoid using paper that is specially treated or previously printed on another machine, and also avoid
performing double copying on the same side of the paper, since this may cause a malfunction.
•
Do not use paper with creases, wrinkles or curls, paper prone to curling, smooth or tough paper; this
may cause paper misfeeds.
•
Paper should be wrapped in its wrapping and stored in a damp-free place.
•
To prevent paper from being folded or bent, store it evenly on a flat surface.
Paper type
Toshiba recommendations/Manufacturer
Mode
Plain paper
TIDAL/Hammermill (20 lb. Bond)
PLAIN
Thick
Laser/Hammermill
(24 lb. Bond)
THICK1
(32 lb. Bond)
THICK2
Exact Index/WAUSAU
(90 lb. Index)
THICK2
(110 lb. Index)
THICK3
Tab paper
CopyTabs/Blanks USA
TAB
Tracing paper
Tracing Paper/Ostrich International (20 lb. Bond only) PLAIN
Sticker labels
5165/Avery
THICK3
OHP film
*
PP2500L/3M
OHP FILM
X-10.0/Folex
OHP FILM