Toshiba E-STUDIO 850 - Manual (Page 284)

282
9.BLINKING GRAPHIC SYMBOLS
4.Jam Symbols (Cont.)
9
Inside of the equipment
If the finishing device is not installed, this procedure is not necessary.
If the External Large Capacity Feeder is not installed, this procedure is not necessary.
1
Press the button to separate the External
Large Capacity Feeder from the equip-
ment.
(See P.268 for cautionary points regarding separation/
installation and moving of the options.)
2 Open the paper feed cover.
3 Remove the paper from the side of the
drawer.