Toshiba TF 610 - Manual (Page 59)

59 GB TOSHIBA TF 610
15-03 19:56 M 100%
2 x
Standby mode
Start the menu
Select submenu (2x)
Make your selection for the function
number
Enter function number
Confirm with ENTER
Current status
Change the status as follows
ON Transmission reported printed
after every transmission
OFF Transmission report printed only
for errored transmissions
Confirm with ENTER
Make your selection for the function
number
Enter function number
Confirm with ENTER
Current setting
Change setting
Confirm with ENTER
Press STOP, return to standby
mode
STOP
FIRST PAGE IMAGE ON
FIRST PAGE IMAGE OFF
ENTER
ENTER
ENTER
ENTER
CONFIRMATION ERROR
Advanced settings
Advanced settings
PARAMETER NUMBER =_
PARAMETER NUMBER =_
Set transmission report
output
This report can be printed after every
transmission or only for errored
transmissions. It provides information
concerning the most important
transmission data.
It is also possible to print part of the first
document of the job in the transmission
report.