Advanced settings – Toshiba TF 610 User Manual

Page 54

TF 610

TOSHIBA

Function no:

Function

BUSY TONE

PUBLIC LINE

PAUSE WAIT TONE

ACCESS

ACCESS CODE

CALLING TIMES

AUTO DELAY

RCV MODE=

TEL DELAY

Advanced settings

Description

The successful detection depend on the
PBAX.
ON:

active

OFF:

not active

Type of connection
PUBLIC LINE: Before dialling a tone check
is made, PABX tones are not accepted
PABX: Dialling after a delay of 3 sec., no
tone check before begin of dialling
INIT WAIT 4 SEC: Dialling after a delay of
4 sec., no tone check before begin of
dialling

~
INIT WAIT 6.0 SEC: Dialling after a delay
of 6 sec., no tone check before begin of
dialling

Procedure after obtaining public line/
pause wait
PAUSE WAIT TONE: Further dialling only
after line access dial tone, PABX tones
are not accepted
PAUSE WAIT 3.0 SEC: Dialling after a
delay of 3 sec., no tone check, after
obtaining public line/pause wait

~
PAUSE WAIT 6.0 SEC: Dialling after a
delay of 6 sec., no tone check, after
obtaining public line/pause wait

Procedure for obtaining public line
(*-key)
NO PUBLIC LINE
PUBLIC LINE FLASH:Flash-Function
PUBLIC LINE EARTH KEY:
Earth key Function
PUBLIC LINE DIGIT: Public line
obtained via code

Enter a (max.) 4-digit code for obtaining
public line. (only useful by ACCESS DIGIT)

Number of synthetic ring signals set in
the TEL/FAX mode
1 SYNTH. RING TEL/FAX

1 ring

10 SYNTH. RINGS TEL/FAX

10 rings

Number of rings before the fax machine
connects to the line in the automatic
receive mode (AUTO lamp is lit)
1st RING

~
10th RING

Reception type in automatic mode (AUTO
LED is lit)
TEL/FAX

TEL/FAX mode

FAX/TAD

FAX/TAD mode

Not relevant for European models