Toshiba TF 610 - Manual (Page 13)

13 GB TF 610 TOSHIBA
Installation
15-03 19:56 M 100%
PROGRAM SETUP DATA
LOCAL NAME
NAME:
NAME: TOSHIBA
STOP
Enter the user name
The transmission header not only contains
the terminal ID but also the user name.
This can contain up to 20 characters.
Each digit features several characters
which can be activated by repeatedly
pressing the corresponding key. If you
have found a character of your choice,
press the „
Ǡ“ key to got to the next
position. Use the „
ǡ“ key to got back
one letter and make any corrections. Use
the „0“ key to select special characters.
If you enter too many characters, press
the CANCEL key to delete the unwanted
characters.
When the name is complete, press the
ENTER-key.
Example: TOSHIBA
Standby mode
Start the menu
Select submenu
Page through the menu...
...until you reach this menu item
Confirm with ENTER
Make your selection
Enter the name
Example: TOSHIBA
1 x 8 = T #
3 x 4 = I #
3 x 6 = O # 2 x 2 = B #
4 x 7 = S # 1 x 2 = A
2 x 4 = H #
Name is complete
Confirm with ENTER
Press STOP, return to standy
mode
Installation
ENTER
ENTER