Have made (for explanations, Advanced settings – Toshiba TF 610 User Manual

Page 53

TOSHIBA

TF 610

The following functions (Parmeter)
are available:

Description

Error correction (ECM) is as follows:
ON: Activated
OFF: Deactivated

Transmission report is produced:
ON: After every transmission
CONFIRMATION OFF: Only after
transmission errors.

A part of the document (to recognize it)
can be printed on the report.
REPORT VISUAL ON: print
REPORT VISUAL OFF: print not

Select, if the TX header will be transmitted
to te other party.
ON: Is transmitted
OFF: Is not transmitted

Select, if the actual date and time will be
printed on the footer line of received
documents.
ON: Is printed
OFF: Is not printed

Preset transmission speeds, transmission
BPS = BIT / Sec.
9600 BPS, 7200 BPS, 4800 BPS, 2400 BPS

Preset transmission speed, reception
BPS = BIT / Sec.
9600 BPS, 4800 BPS

Actual COMLINE status
ON COMLINE enabled
OFF COMLINE disabled
ONE only one COMLINE session

Dialling method: DTMF

PULSE DIALLING

Number of redial attempts if transmission
is not successful
02 2 twice
~
10 10 times

Period between redial attempts if
transmission is not successful
30 SEC 30 seconds
~
1 MIN
2 MIN
3 MIN
10 MIN
20 MIN 20 minutes

Period between redial attempts if line is
busy
1 MIN 1 minute
~
10 MIN 10 minutes

Function no.

Function

ECM

CONFIRMATION

FIRST PAGE IMAGE

HEADER PRINT

RECEIVE FOOTER

TX SPEED

RCV SPEED

RDC ACCEPTANCE

DIAL METHOD TONE

REDIAL TIMES

REDIAL INT.

DUAL INTERVAL

Advanced settings

]

✽ ) This function may not be available in machines in certain countries.