Toshiba TEC EM1-31071GE - Manual (Page 11)

2-2
2. SPECIFICATION
2.2 OPTION
NOTES: 1. Contact TOSHIBA TEC H.Q. or your nearest TOSHIBA TEC representative.
2. Order from TOSHIBA TEC Parts Center or purchase locally.
3. When purchasing memory modules locally, select one having the following specifications.
■ Maker: HITACHI Pseudo Static RAM (OP-9000-RAM-512KB)
HITACHI Static RAM (OP-9000-SRAM-512KB)
■ Type: HM658512ALP-8V80ns, 600mil 32-pin Plastic DIP (DP-32) (OP-9000-RAM-
512KB)
HM628512ALP-770ns, 600mil 32-pin Plastic DIP (DP-32) (OP-9000-SRAM-
512KB)
2.2 OPTION
Option Name
LON
LON Connector
TM8P-88P Part No.
EAJ-0028001 See
Note 2
See
Note 2
See
Note 2
See
Note 1
See
Note 1
See
Note 1
See
Note 1
See
Note 1
See
Note 1
See
Note 1
and 3
See
Note 1
Part No.
EAJ-0029001
Part No.
10319100003
OP-9000-IOEC-B
OP-9000-IOB
LON Terminal
Resistor 285D-8P
LON Cable
S-STLAN-2P
(200 m/roll)
External Connector
Box
I/O PC Board
OP-9000-IOCN-
TMCC TMCC Cable Kit
OP-9000-IOCN-
232CL RS-232CL Cable
Kit
OP-9000-IOCN-
232CS
OP-9000-
PIGGYBACK
OP-9000-
PIGGYBACK-S/F
OP-9000-RAM-
512KB
OP-9000-SRAM-
512KB
OP-9000-
CASSETTE
RS-232CS Cable
Kit
TMCC
RS-
232C
MEMO PC Board
Memory Module
Label Cassette
Description Source
Model No.
or Part No.
A modular connector used to connect scales
to each other in a LON configuration.
A modular resistor attached to the scales
connected at both ends of the LON
configuration.
An 8-pin telephone cable used with the LON
connectors attached to both ends of the
cable. This cable connects scales to each
other in a LON configuration.
A junction box to which the TMCC kit is
attached. It is also used with the RS-232
CL/CS kit.
An I/O board equipped with the TMCC
interface and an RS-232C interface (2 ch)
ports. It is used to construct a TMCC and
RS-232C systems.
A cable kit for the TMCC interface
Cable kit for the RS-232C interface including
a D-sub 9-pin female PC connector.
Cable kit for the RS-232C interface including
a D-sub 9-pin male PC connector.
This board is used to expand the PLU
memory to 4MB by installing the memory
module.
DIP type PS-RAM to be installed on the
MEMO PC board (OP-9000-PIGGYBACK) for
memory expansion.
When expanding the memory, install the two
modules as one set.
DIP type S-RAM to be installed on the MEMO
PC board (OP-9000-PIGGYBACK-S/F) for
memory expansion.
When expanding the memory, install the two
modules as one set.
In is covenient to change several kinds of
labels.