TRENDnet 10/100 Mbps Ethernet Card PF-16 PCMCIA - Manual (Page 5)

1
Chapter 1 Chapter 1 Chapter 1 Chapter 1
Introduction
Thank you for purchasing the PCMCIA 10/100 Mbps Ethernet
Card.
This high-speed Ethernet network adapter card complies with the
PCMCIA Type II standard and uses a female RJ-45 adapter to
connect to the network.
The Ethernet Card is switchless and software configurable. An
enabler program is used to set up the card for your operating sys-
tem; even without the card and socket service drivers for the
PCMCIA controller installed, you will still be able to use the card
by running the enabler program.
Features
•
Type II credit-card size (5.0 mm)
•
Complies with IEEE 802.3u 100Base-TX and 802.3
10Base-T protocols.
•
Supports all popular operating systems
•
Supports Nway auto-negotiation for 10/100 Mbps full/half-
duplex
•
Complies with PCMCIA Release 2.1 specifications and later
•
Supports hot swap card insertion and removal
•
PC Card standard 68-pin 16-bit PCMCIA interface
•
5V power consumption
•
FCC/VCCI/CE certified