TRENDnet 10/100 Mbps Ethernet Card PF-16 PCMCIA - Manual (Page 31)

• • ! • • • • • • • —Driver installation for DOS environments
!
27
9. Click OK. The message “Configuration Complete” ap-
pears.
10. Click Save, then press to exit.
Artisoft LANtastic version 6.0
Follow these instructions to install the Artisoft LANtastic Version
6.0 client for your Ethernet Card:
1. Run the INSTALL program, and choose LANtastic.
2. Select Artisoft LANtastic, and specify C:\LANTASTI as
the destination directory.
3. When the Select network adapter screen appears, choose
NDIS Support for Network Adapters.
4. When the install program prompts you for the manufac-
turer’s driver disk in the Enter NDIS driver directory
screen, insert the driver disk.
5. Follow the instructions on the screen to complete the in-
stallation, then reboot the computer to start LANtastic.