TRENDnet 10/100 Mbps Ethernet Card PF-16 PCMCIA - Manual (Page 28)

PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
24
!
Driver installation
The following sections cover installation of the client driver for
Windows NT 3.51,
Windows for Workgroups 3.11, Netware
3X/4X, Microsoft LAN Manager, and Artisoft LANtastic Version
6.0.
Microsoft Windows NT 3.51
Follow these instructions to install the Microsoft Windows NT
3.51 client for your Ethernet Card:
1. Insert the Ethernet Card into an available PCMCIA slot.
2. Boot the computer.
3. Click Control Panel in the main window and click the
Network icon.
4. Click Add Adapter. Pull down the adapter’s list and se-
lect Requires disk from manufacturer, then
click Continue.
5. Type “A:\winnt351” (where “A” is your floppy drive) and
click OK.
6. Set the proper IRQ, I/O port, memory address settings, and
connection type for this card.
7. Reboot the computer to complete the installation.