Driver installation for windows nt 4.0 – TRENDnet 10/100 Mbps Ethernet Card PF-16 PCMCIA User Manual
Page 15
• • ! • • • • • • • —Driver installation for Win 95/98/NT
!
11
Driver installation for Windows NT 4.0
This installation procedure assumes that you have installed the
network component on your computer.
To check whether the network component has been installed, dou-
ble click the Network icon in the Control Panel. If it has not
been installed, refer to the Windows NT 4.0 installation guide for
instructions on installing the component.
While installing the network component, Windows NT 4.0 will
prompt you to install the network adapter driver. Follow the steps
below to install the driver.
1.
Insert the Ethernet Card into an available PCMCIA slot on
your notebook (refer to page 3 “Inserting the Ethernet
Card”).
2.
Log in to NT 4.0 as “Administrator”.
3.
Double click the Network icon in the Control Panel, and
select the Adapters tab as shown in the following screen: