TDK J Series JBW - Manual (Page 10)

(10/30)
004-02 / 20070523 / ea122_jbw.fm
• All specifications are subject to change without notice.
JBW75W Type
SPECIFICATIONS AND STANDARDS
Part No. JBW05-15R JBW12-6R3 JBW15-5R0 JBW24-3R2
Rated output voltage and current 5V • 15A 12V • 6.3A 15V • 5.0A 24V • 3.2A
Maximum output power W 75 75.6 75 76.8
Input conditions
Input voltage Eac/Edc
V 85 to 265[Rating: 100-240]/120 to 370
Input frequency Hz 47 to 66
Input current A 1.6/0.8max.[100-240V]
Fuse rating A 3.15
Surge current A 30/60max.[100-240V]
Leakage current mA 0.75/0.75max.[AC.100V(DENAN)/240V(UL, IEC)]
Power factor 0.99/0.95typ.[100-240V]
Efficiency %
75/77typ.
[100-240V] 78/80typ.
[100-240V] 79/81typ.
[100-240V] 82/84typ.
[100-240V]
Output characteristics
Output voltage Edc
V 5 12 15 24
Voltage variable range Edc V 4.5 to 5.5 10.8 to 13.2 13.5 to 16.5 21.6 to 26.4
Maximum output current A 15 6.3 5.0 3.2(Peak4.2)
Overvoltage threshold Edc V 5.75 to 6.9 13.8 to 16.8 17.2 to 21 27.6 to 33.6
Overcurrent threshold A 15.8min. 6.6min. 5.2min. 4.4min.
Voltage
stability
Source effect % 0.4max.[Within the input voltage range]
Load effect % 0.8max.[0 to 100% load]
Temperature effect % 1max.[Ambient temperature: –10 to +60°C]
Drift(Time effect) % 0.4max.[25°C, input and output ratings, after input voltage ON for 30min to 8h]
Recovery % ±4max.[50 to 100% sudden load change]
Ripple Ep-p mV 80 120 120 120
Ripple noise Ep-p mV 120 150 150 150
Start up time ms 500max.(400typ.)/250max.(200typ.)[AC.100/240V]
Hold up time ms 20typ.[100-240V]
Auxiliary functions
Indicator display
No
Overvoltage protection Voltage shut-down type(Latch).
Overcurrent protection Rectangular type, automatic recovery.
Remote ON-OFF No
Remote sensing No
Standards
Safety standards
UL60950-1, CSA C22.2 No.60950-1(C-UL), EN60950-1(TÜV) approved.
Noise terminal voltage FCC-B, VCCI-B, EN55011-B, EN55022-B meet.
Input harmonics current requirement EN61000-3-2
CE marking Planned compliance.
Constructions
External dimensions
mm 32 Ч 55Ч 222[HЧ WЧ L]
Weight g 290max.
Mounting method Can be attached to 1 side.
Case material CEM3