Toshiba RELIABILITY IN MOTION 1000 - Manual (Page 41)

18
2. “ ” is the Enter button.
(a) Press and hold the Enter button for at least 2 seconds to read the parameter
settings of the UPS. Press the Enter button again to read the next parameter.
(b) Ten seconds of inactivity will return the display to the original status.
3. “ ” is the Function button.
(a) Press and hold the Function button for at least 2 seconds to access the selectable
parameters. Press the Function button again to view the next parameter.
(b) Press the Enter button to view or change the displayed parameter.
(c) Ten seconds of inactivity will return the display to the original status.
6.3 Control Panel Functions
The front panel is composed of five LED indicators, an LCD screen, and a speaker for
audible alarms.
ON/ — is on when the UPS is turned on (green).
ON-LINE/ — is on when in the Normal or Static Bypass modes. Also indicates
that there is voltage at the output terminals (green).
ON-BAT/ — is on while operating in the Battery mode.
BYPASS/ — is on while operating in the Bypass mode (yellow).
ALARM/ — is on during active UPS internal errors (red). FAULT is
accompanied by an audible alarm. Press any of the front panel buttons
to cancel the alarm.