Connections and initial set up – Technicolor - Thomson DTH7500 User Manual

Page 7

Connections and initial set up

Sorting the channels

A channel sorting window will appear.The picture of the selected channel is shown in the
background.

The automatic channel search has assigned numbers to the channels is a predefined order.These
numbers may not be the numbers you would have chosen. Should this be the case, you can
change these numbers by following the instructions at the bottom of the screen. For easy channel
identification, we suggest you have a TV magazine at hand.

Note: Channel sorting instructions:
Move: press

(then the

and

keys until you reach the

desired position (Pr no. on the left of the list then

: swapping

of the 2 channels).

Delete:

CLEAR

key.

Rename:

INFO

keys, then

and

to search for a name on

the list. Validate by pressing

Decoder set-up:

(key (displays a symbol in the list of channels).

10.

When all channels have been sorted to your liking, press the

key.

Your DMR has an automatic time (and date) setting function. In general, no setting is required on
your part.

11.

If the time and date information is correct, press twice on

.The Main Menu of the DMR is

displayed: the installation of the channels is now complete.

Clock setting

AutoClock: If the date and time information is not correct, adjust the clock as described below,
then check in the Installation menu that the automatic time setting is activated.This menu is
reached from the Setup menu (see page 49). Setting the time and date on the DMR is important
for the proper operation when recording programmes and for optimum downloading of the
programmes guide NAVICLICK.

Select Year. Enter 4 digits for the year
(2, 0, 0, 3 for 2003).

Then enter the 4 digits of the date
(press 1

5 for 12th May).

Enter the 4 digits of the time
(press 1

9 for 15:59 (03:59 PM).

Then press twice on

OK.

The Main Menu will appear

again. Channel set-up is complete.

Note:You can now use your DMR and take advantage of its numerous functions. If you want to connect a
satellite receiver to your DMR refer to page 10 for the recommended connection.You can also complete your
installation through the settings available in the Options menu (refer to pages 48-49). These adjustments
depend on the other devices that you are likely to connect to your DMR.

If you want to redo the automatic channel set-up, you will have to select Interactive setup in the
Installation menu (in the Setup menu).

DTH7500_en 4/07/03 16:55 Page 7