Connections and initial set up – Technicolor - Thomson DTH7500 User Manual

Page 11

Connections and initial set up

DMR / satellite or cable receiver settings

Switch on your TV set, your DMR, then your satellite or cable receiver.

Place the receiver on channel 02.

With your DMR’s remote control, carry out the following settings:

If the main menu is not displayed, press the

MENU

key on the remote control.

Select the Setup line using the

and

keys, and press

to validate.

Select the Installation line using the

and

keys, and press

to validate.

The Interactive setup line is already selected. Press

Choose a display language for the following screens.

Select your country of residence using the

and

keys, and press

The Automatic line is already highlighted, press

The screen which appears is a set-up screen for the allocation of input terminals.

If you connected your devices as indicated on page 10, check that AV2-SAT-CABL has been
allocated to Satellite Receiver, or Cable Receiver otherwise change the allocation using
the

key.

Note: Cable Receiver or Satellite Receiver: to
connect with a satellite or cable receiver terminal on the AV2
socket of your DMR (connection shown on page 10). The
other settings are explained on page 6.

Then select the line Done and press

Note: an installation window will appear. A cursor shows the
progress in the set-up of the channels. When all the channels
that you can receive in your area have been stored, 100 % is
indicated.

Press

From now on, follow on-screen instructions appearing in the various windows. If need be,
refer to the additional explanations given below.

DTH7500_en 4/07/03 16:55 Page 11