Technicolor - Thomson DTH7500 - Manual (Page 4)

4
Connections and initial set up
1. Unplug the antenna cable from your TV set and plug it into the ANTENNA-CABLE IN
socket of your DMR.
2. Using the coaxial cable supplied, connect the ANTENNA-CABLE OUT socket of the
DMR to the
g antenna socket of your TV set.
3. Using the Scart cable supplied, connect the DMR’s AV 1 (TV) socket (TV) to the scart
socket of your TV set (labelled AV 1, EXT 1, AUX 1 depending on the brand).
4. Use the mains cable to connect your DMR to a mains socket, by first connecting the cable to
the back of the DMR.
Note: connection to a satellite or cable receiver is detailled on page 10.
Basic connections
Your DMR has many connection possibilities to allow it to fit into a setup comprising several
devices.We recommend that you follow the connection setup on this page, and then carry out
the adjustments shown on the following pages.You will first need to set up the channels as
explained in the following pages before the final interconnection of the devices, described on
pages 10 to 16.
TV
DMR - DTH 7500
220 - 240 V
50 - 60 Hz
DTH 7500 U
DTH 7500 E
Scart cable Coaxial Cable
1
2 3
4
DTH7500_en 4/07/03 16:55 Page 4