Connections and initial set up, Automatic channel search – Technicolor - Thomson DTH7500 User Manual

Page 6

Connections and initial set up

Select your country of residence using the

keys, and press

Note: The screen only displays 3 countries at one time. The
arrows above and below indicate other possible countries.
Scroll through the list of countries with the

and

keys.

On the screen that is displayed, the Automatic option is
already selected. Press

The screen displayed is a set-up screen for the allocation of
input terminals.

If you connected your devices as indicated on page 3,
check that

Antenna-Cable

has been allocated to

Antenna-Cable

, otherwise change the allocation

using the

key on the remote control. For the

other selections (AV2, AV3, AV4) leave them allocated
to Nothing and continue to step 8.

Note: Other terminal settings (set with the

keys).

The AV2-SAT-CABL connection is intended for a satellite or
cable receiver.The installation of a satellite or cable receiver is
explained on page 10.

AV3-Front and AV4 correspond to the IN or INPUT inputs
of a device supplying Composite Video signals (CVBS) or S-Video.
The Other option is for connection of another device (video
recorder…).
Nothing: If no device is connected to the socket concerned.

Then select the

Done

line with the

key, and

press

An installation window will appear. A cursor shows the
progress in the set-up of the channels.You will need to
wait a fair amount of time.When all the channels that you
can receive in your area have been stored, 100 % is
indicated.The number of channels found is indicated by
XX channels found.

Press

Automatic channel search

In each region,TV stations are broadcast on different channels.Your DMR cannot be factory-set
to receive the TV channels of your area.You will have to set up the channels by following the
automatic procedure recommended below.

Note:Your DMR is equipped with the AV Link. function. This function simplifies channel set-up by
downloading them from an AV Link or similar television set (Easy Link, Smart Link, Megalogic, etc.) which is
already set up. The channels downloaded in this way keep the same characteristics as those of your TV set
(same number, name, etc.).Your DMR’s AV Link downloading function is enabled (factory setting). If you wish
to de-activate this function, see page 49.

DTH7500_en 4/07/03 16:55 Page 6