Technicolor - Thomson DTH7500 - Manual (Page 20)

Remote control
20
Using the remote control handset to control your television
and satellite or cable receiver
The DMR remote control handset is a 3 in 1 device that allows you to control the operation of
3 devices: your DMR, a television set, or satellite receiver.This page describes the keys that
control your television set and your satellite or cable receiver if they have the same functions.
Controlling a TV set
TV Sets the remote control unit in TV mode (by pressing once) and enables
you then to control your TV set.
Switches the TV set on or off.
Volume control.
Switches sound off or on again.
PR Switches channel or selects an AV socket.
AV Selects an AV socket.
0 to 9 Keys enter digital values or change channel.
ZOOM Enlarges (zooms in on) the picture on some TV sets.
MENU Displays main TV set menu.
RETURN Returns to the previous menu.
CLEAR Removes menu or other information displayed on the screen.
GUIDE Displays TV programme guide.
INFO Displays information about the channel.
Note: colour keys enable one to use the teletext function on THOMSON TV sets.
Controlling a satellite or cable receiver
SAT.CABLE Places the remote control in the SAT•CABLE mode (press once) and
then enables you to control your satellite or cable receiver.
To turn on or off the satellite or cable receiver.
PR Switches channel.
0 to 9 Keys enter digital values or change channel.
MENU To display the main menu of the satellite or cable receiver.
RETURN Returns to the previous menu.
CLEAR Removes menu or other information displayed on the screen.
GUIDE Displays the Naviclick page (if available).
INFO To display the info on the channel or operation of the satellite or cable
receiver.
Remote control - Code A-B
With certain devices (combined TV/DVD or other DVD player) it may
happen that your DMR controls the DVD player of the other device. In this
case you can adjust your remote control and the DMR on another code
known as code B (adjustment shown on page 57).
DTH7500_en 4/07/03 16:55 Page 20