Texas Instruments 4000M - Manual (Page 29)

Using Disk Drives
Floppy Drive Guidelines
T
Failure to observe the following precautions can damage both the
floppy drive and the data on the floppy:
T
Insert the floppy into the floppy drive slot with the label side up and
the metal-shutter end first. Gently push the floppy into the floppy
drive slot until the floppy clicks into place.
T
To remove a floppy, press the eject button until the floppy pops out.
T
Never remove a floppy while the indicator on the floppy drive is on.
T
Never force open the access shutter on a floppy.
T
Always remove a floppy from the floppy drive before turning off the
computer.
T
Never transport the computer with a floppy in the floppy drive. Doing
so can damage the drive head.
T
If a floppy appears to be damaged, try to make a copy of it, and
immediately discard it.
T
Keep all floppies when not in use in a disk storage box to protect them
from damage or loss.
1-21