Texas Instruments 4000M - Manual (Page 100)

Startup Error Messages
No boot device
V
available - press F1
V
to retry boot
V
No boot sector on
V
fixed disk - Press F1
to retry boot
V
Non-System disk or
V
disk error. Replace
and press any key
V
when ready
V
Time-of-day not set
V
Press F1 to try loading MS-DOS again.
Replace the floppy if you are loading MS DOS from
a floppy.
Press Ctrl-Alt-Esc to ensure that the drive type is
set correctly in Setup.
Press F1 to try loading MS-DOS from the hard disk
again.
Load MS DOS from a floppy, and try to display a
directory of drive C. If you cannot display a
directory, the hard disk may need to be reformatted.
Caution: Reformatting erases all of the data
on the hard disk. Reformat your hard disk
only as a last resort.
Eject floppy from floppy drive, and press a key to
load MS DOS from the hard disk.
Insert a floppy containing MS-DOS in the floppy
drive, and press a key.
Press Ctrl-Alt-Esc to ensure that the drive type is
set correctly in Setup.
The battery sustaining the system configuration has
failed. Follow the procedure in this chapter to
restore the configuration.
6-5