Texas Instruments TM5000 Series - Manual (Page 56)

Standby and Suspend
Standby and Suspend are the two methods for
putting your computer to "sleep." This can save
battery power when you are not actively using
your computer. Refer to Chapter 1 for detailed
information on these functions.
c
Caution: Using the Suspend/Standby modes
for too long can discharge the battery
to the
point that it can no longer power both
the
LCD and the hard disk. If this occurs, your
computer will not come out of Standby mode
and you must recharge your battery, plug in
the AC power adapter, or replace one of the
batteries with a charged battery.
Standby and Suspend
3-8