Asus P4-P5N9300 - Manual (Page 74)

4-32 Chapter 4: BIOS setup
4.5.4 Hardware Monitor
The items in this submenu displays the hardware monitor values automatically
detected by the BIOS. It also allows you to change CPU Q-Fan feature-related
parameters. Select an item then press to display the configuration
options.
Select Menu
Item Specific Help
Press [Enter] to
enable or disable
Phoenix-AwardBIOS CMOS Setup Utility
Power
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit
Hardware Monitor
Q-Fan Controller [Enabled]
Vcore voltage [1.26V]
3.3V Voltage [3.32V]
5V Voltage [5.10V]
12V Voltage [12.09V]
CPU Temperature 47ºC
M/B Temperature 32ºC
CPU Fan Speed 2177 RPM
CPU Fan Speed Warning [600 RPM]
Q-Fan Controller [Enabled]
Allows you to enable or disable the Q-Fan controller. Configuration options:
[Disabled] [Enabled]
Vcore Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage [xxxV] or
[Ignored]
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators.
CPU Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the motherboard
and CPU temperatures.
CPU Fan Speed [xxxxRPM]
The onboard hardware monitor automatically detects and displays the CPU
fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows N/A.