Asus P4-P5N9300 - Manual (Page 73)

ASUS P2-P5N9300/P4-P5N9300 4-31
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item
is set to [Enabled], the Date of Month Alarm and Alarm Time (hh:mm) items
become user-configurable. Configuration options: [Disabled] [Enabled]
Date (of Month) Alarm [XX]
To set the date of alarm, highlight this item and press to display the Date
of Month Alarm pop-up menu. Key-in a value within the specified range then press
. Value ‘0’ means everyday. Configuration options: [Min=0] [Max=31]
Alarm Time (hh:mm) [ X: X: X]
To set the time of alarm:
1. Highlight this item and press to display a pop-up menu for the hour
field.
2. Key in an hour value (Min.=0, Max.=23), then press .
3. Press to move to the minutes field then press .
4. Key in a minute value (Min.=0, Max.=59), then press .
5. Press to move to the seconds field then press .
6. Key in a second value (Min.=0, Max.=59), then press .
HPET Support [Enabled]
Configuration options: [Disabled] [Enabled]
WDRT Support [Enabled]
Configuration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the first
try. Turning an external modem off and then back on while the computer is off
causes an initialization string that turns the system power on.
Power On By External Modems [Disabled]
Enables or disables RI to generate a wake event. Configuration options: [Disabled]
[Enabled]