TRENDnet TFM-PCIV92A - Manual (Page 6)

TFM-PCIV92A User’s Guide
_________________________________________________________________________________________________________________________
- 9 - Rev.1.00.2.1.34
Section 2.3.6 Uninstall Modem from Windows 2000
STEP 1. Open Control Panel window and choose Add/Remove Programs icon.
STEP 2. Select Agere Systems PCI Soft Modem device in Change or Remove Programs tab, then click
on Change/Remove.
STEP 3. Click Yes to ensure to remove Agere Systems PCI Soft Modem device and its drivers.
STEP 4. Click Yes to restart your computer for all of the changes to take effect.
TFM-PCIV92A User’s Guide
_________________________________________________________________________________________________________________________
- 10 - Rev.1.00.2.1.34
Section 2.3.7 Setup instructions for Windows XP
STEP 1. After you complete the modem hardware installation and turn on your PC, Windows system will
automatically detect and install your new added devices. Windows system will prompt you with an
Add New Hardware Wizard.
Click on Cancel.
STEP 2. Insert the Modem Driver CD-ROM disk attached with your modem into the CD-ROM drive device,
Then run :\Drivers\Win2K&XP\SETUP.EXE to upgrade the modem driver as
shown in figure.
Then click on OK.
STEP 3. And then, a prompt screen will ask you to ensure to install the modem driver.
Then click OK.
The setup utility will copy the needed files into windows system.