TRENDnet TFM-PCIV92A User Manual
Page 4

TFM-PCIV92A User’s Guide
_________________________________________________________________________________________________________________________
- 5 -
Rev.1.00.2.1.34
Section 2.3.3
Setup instructions for Windows Me
STEP 1. After you complete the modem hardware installation and turn on your PC, Windows system will
automatically detect and install your new added devices. Windows system will prompt you with an
Add New Hardware Wizard.
Click
on
Cancel.
STEP 2. Insert
the
Modem Driver CD-ROM disk attached with your modem into the CD-ROM drive device,
then run
in figure.
Then click on OK.
STEP 3. And then, a prompt screen will ask you to ensure to install the modem driver.
Then
click
OK.
The setup utility will copy the needed files into windows system.
STEP 4. If there is no error message while the system is installing, your modem has been set up properly
and functionally.
TFM-PCIV92A User’s Guide
_________________________________________________________________________________________________________________________
- 6 -
Rev.1.00.2.1.34
Section 2.3.4
Uninstall Modem from Windows Me
STEP 1. Open Control Panel window, then click on Add/Remove Programs icon.
STEP 2. Choose
Agere Systems PCI Soft Modem device in Install/Uninstall tab, then click on
Add/Remove...
STEP 3. Click
Yes to ensure to remove Agere Systems PCI Soft Modem device and its drivers.
STEP 4. Click
Yes to restart your computer for all of the changes to take effect.