Tuning channels, Using the channel browser – Toshiba 72HM195 User Manual

Page 70

(E) 56/62/72HM195

Adding and clearing channels in the
channel history

Adding channels to the channel history

The Channel Browser automatically creates a history of the
last 32 channels that were tuned in the current input (ANT 1,
ANT 2, and Cable Box inputs only). A separate history will be
stored for each of these inputs.

If you change the input you are viewing:

a) you will begin a channel history for that input if one did

not exist; or

b) you will return to the existing channel history for that input

if one had already been started.

The Channel Browser will store the following channels:
• All channels that are tuned using the numeric buttons on the

remote control.

• All channels that are tuned for at least 7 seconds using the

yz buttons or the FAV CH y z buttons on the remote

control.

Note:
• The Channel Browser banner will not appear when the POP double

window is open; however, channels tuned while the POP double
window is open will be added to the Channel Browser history for the
current input.

• The Channel Browser banner will not appear in the FAV SCAN

(favorite scan) multi-window. Channels that appear in the FAV SCAN
multi-window will not be added to the Channel Browser history;
however, the channel last selected from the multi-window will be
added to the channel history.

Clearing channels from the channel history

• Turning off the TV will clear all three channel histories

(ANT 1, ANT 2, and Cable Box).

• Removing the CableCARD

™

will clear the channel history

for the ANT 1 input.

• Reconfiguring the ANT 1, ANT 2, or Cable Box input

will clear the channel history for the newly configured
input(s).

Note: See page 41 for details on configuring the antenna inputs.

Tuning channels

(continued)

Setting a channel as the “Home” channel
for an input

To set a channel as Home using the remote control:

1. Tune the TV to the channel you would like to set as the

Home channel for the current antenna input.

2. Press and hold the HOME (

) button on the remote

control for 3 seconds. When the Home channel is saved,
the Channel Browser banner will appear at the bottom of
the screen with the home icon flashing green.

Note: You can set a different Home channel for each input
(ANT 1, ANT 2, and Cable Box inputs only).

To set a channel as Home using the menus:

1. Press MENU and open the Preferences menu.
2. Highlight Home CH Setup and press ENTER. The Home

CH Setup window will display.

Done

Home CH Setup

ANT 1

- -

ANT 2

- -

Cable Box

- -

Reset

Note: "Cable Box" will be active in the Home CH Setup
window only if you connected a cable box to your TV.

3. Use the

y z buttons to select the input for which you

want to set the Home channel.

4. Use the numeric and dash (–) buttons on the remote

control to enter the desired Home channel for each input.

5. To save your entries, highlight Done and press ENTER.

To clear your entries, highlight Reset and press ENTER.

To tune to the Home channel:
While an input that has a set
Home channel is active, press the
HOME (

) button on the

remote control.

Note: If you press the HOME
button while an input other than
an antenna or Cable Box input is
selected, the TV will tune to the
most recently tuned Home
channel and input.

Chapter 8: Using the TV’s features

Using the Channel Browser™

(continued)

HOME (

)

x /BACK

•/NEXT

#01E_067-078_566272HM195

7/28/05, 4:45 PM

Black

This manual is related to the following products:

62HM195