Toshiba 32TL515U - Manual (Page 59)

59
Chapter 7: Picture and sound controls
Setting Type
You can adjust the white balance setting.
1
> Settings > PICTURE > Expert Picture
Settings > .
2
Press B or b to select White Balance. Press .
3
Press C or c to select 2P White Balance. Press .
4
Press B or b to select Red-Offset, Green-Offset,
Blue-Offset
, Red-Gain, Green-Gain, or Blue-
Gain . Press C or c to adjust.
Copy to All Inputs
This feature copies White Balance on the current input
to all other inputs. Individual settings that are not
allowed for a specific input will not be copied.
1
> Settings > PICTURE > Expert Picture
Settings > .
2
Press B or b to select White Balance. Press .
3 Press B or b to select Copy to All Inputs. Press .
A confirmation screen appears.
4
Select Yes. Press .
Resetting to the factory default
1 > Settings > PICTURE > Expert Picture
Settings > .
2
Press B or b to select Reset. Press .
A confirmation screen appears.
3
Select Yes. Press .
Locking the picture settings
The TheaterLock ™ feature lets you lock items in the
PICTURE menu that affect the picture’s display. These
items cannot be modified when TheaterLock is set to
On
.
1
> Settings > PICTURE > TheaterLock.
2
Press C or c to select On. Press .
Adjusting the audio
Muting the sound
Press to partially reduce (1/2 Mute) or turn off
(Mute) the sound. Each time you press , the mute
mode changes in the following order:
If the closed caption mode is set to Off when you select
MUTE mode, the closed caption feature becomes active
if the TV program is closed-captioned. To mute the
audio without activating the closed captioning, press Z
to set the volume to 0.
Note: If you modify items in the SOUND menu while Mute
is active, Mute is cancelled.
Selecting stereo/SAP broadcasts
The MTS (multi-channel TV sound) feature is only
available for analog signals on the ANT/CABLE input.
When the TV receives a stereo or SAP (second audio
program) broadcast, the icon STEREO or SAP appears
onscreen when Q is pressed.
To listen in stereo sound:
1
> Settings > SOUND > MTS.
2
Press C or c to select Stereo. Press .
Note:
• You can typically leave the TV in Stereo mode because
it outputs the type of sound being broadcast (stereo or
monaural).
• If the sound is noisy, select Mono.
To listen to a second audio program on an analog
station (if available):
If provided by individual analog stations, you can listen
to a second audio program containing another
language, music, or other audio information.
For example, you will hear the other language instead
of the program’s normal audio.
1
> Settings > SOUND > MTS.
2
Press C or c to select SAP. Press .
Note: If there is no sound in SAP mode, select Stereo.
O K
O K
O K
O K
O K
O K
O K
O K
O K
O K
Volume 1/2 Mute Mute