Using the microphone – Toshiba Computer L300 User Manual
Page 86
4-26
User’s Manual
L300/L300D series
Using the microphone
Some models are equipped with a built-in microphone that can be used to
record monaural sounds into your applications. It can also be used to issue
voice commands to applications that support such functions.
Since your computer has a built-in microphone and speaker, “feedback”
may be heard under certain conditions. Feedback occurs when sound from
the speaker is picked up in the microphone and amplified back to the
speaker, which amplifies it again to the microphone.
This feedback occurs repeatedly and causes a very loud, high-pitched
noise. It is a common phenomenon that occurs in any sound system when
the microphone input is output to the speaker (throughput) and the speaker
volume is too loud or too close to the microphone. You can control
throughput by adjusting the volume of your speaker or through the Mute
function in the Master Volume panel. Refer to your Windows documentation
for details on using the Master Volume panel.
Audio Recording
Click to start recording, Click again to stop and
listen to a preview of the audio.
Function
Accesses additional functions: About, Player,
Effects, Properties, Settings and Help.
About
Displays software manufacturer details.
Player
Plays video files.
Effects
Chooses images to be displayed on the capture
screen.
Properties
Chooses from the Options tab to flip, zoom,
flicker rate, night mode and backlight
compensation; in the Image tab change the
colour settings; in the profile tab change the
lighting conditions.
Settings
Chooses from the : Options tab to change the
tool position; the Picture tab to select picture
output options such as size, export file and saving
location; the Video tab to choose output settings
such as Frame Rate, Size, Compression and the
file save path; the Audio Device,
Compression,Volume and file save path.
Help
Displays the help files for the software.