Trimble Outdoors AgGPS 252 - Manual (Page 64)

B Third-Party Interface Requirements
5 8 AgGPS 252 Receiver User Guide
B.2
Third-Party Hardware
Table B.2 lists the interface requirements for connecting an AgGPS
receiver to third-party hardware.
HGIS Starpal NMEA GGA, RMC 4800 or
9600 8-N-1 1Hz
Instant Survey Agrilogic
(Case-IH) NMEA GGA, GSA, RMC 4800 8-N-1 1Hz
Pocket Survey Agrilogic
(Case-IH) NMEA GGA, GSA, RMC 4800 8-N-1 1Hz
Sitemate Farmworks NMEA GGA, VTG 4800 8-N-1 1Hz
Table B.2 Third-party hardware interface requirements
Hardware Company Protocol NMEA
messages Baud Other Pos
rate Cable P/N
AMS Raven NMEA GGA, VTG 9600 8-N-1 1Hz
50166, or
30945 plus
50581
Ag Navigator Springhill RTCM 9600 8-N-1 10Hz
Aim
Navigator Case Tyler NMEA GGA 19200 8-N-1 5Hz
Contour Position Inc. NMEA GGA 19200 8-N-1 5Hz
Marker RDS or
Position Inc. NMEA GGA 19200 8-N-1 5Hz
Falcon Ag Chem NMEA GGA, VTG 4800 8-N-1 1Hz
Table B.1 Third-party software interface requirements (continued)
Software Company Protocol NMEA messages Baud Other Pos rate
Ag252_100B_UserGuide_ENG.book Page 58 Thursday, July 28, 2005 4:06 PM