beautypg.com

Configuring the, Configuring the communication ports – Trimble Outdoors AgGPS 252 User Manual

Page 37

background image

AgGPS 252 Receiver User Guide 31

Configuring the Receiver 4

4.1

Configuring the AgGPS 252 Receiver to
Operate in RTK Mode

Use the AgRemote utility to configure the AgGPS 252 receiver for
operation in RTK mode. To configure the receiver:

1.

Connect the AgGPS 252 receiver to the computer. Turn on the
receiver and start the AgRemote utility.

2.

In AgRemote, select Configuration / DGPS Config.

3.

Set the Source Select field to RTK.

4.

Press

4

then

5

to complete this part of the procedure.

5.

For RTK operation, connect the radio to a port. Change the port
input settings for that port to RtkLnk.

4.1

Configuring the Communication Ports

If the AgGPS 252 receiver is to be connected to an external device,
configure Ports A and B so that the proper data type is input to and
output from the receiver.

Ag252_100B_UserGuide_ENG.book Page 31 Thursday, July 28, 2005 4:06 PM