Tripp Lite XL - Manual (Page 8)

A
B
8
Installation
continued
Networking the PDU
continued
Testing Network Connection
6-1 Access PDU with Web Browser: After an
IP address has been assigned to the PDU, attempt
to access it with a Web browser that supports
frames, forms and Java™. Open a Web browser
on a computer connected to the LAN and enter
the IP address assigned to the PDU. You should
be prompted for a password
A . The user name is
admin and the default password is admin. After
you enter the user name and password, the
PowerAlert Status page
B will appear in the
browser window. For more information about
configuration and operation of the PDU via the
PowerAlert interface, refer to the
SNMPWEBCARD User's Guide, included on the
CD-ROM bundled with the PDU.
Note for Network Management System Users Only: Two MIB files
- Tripplite.mib and RFC1628.mib - must be loaded on each
Network Management Station that will monitor the PDU via
SNMP. The files are provided on the CD-ROM included in the
product package.
201110149-93-2718.indd 8 11/9/2011 11:17:33 AM