Toshiba G500 - Manual (Page 37)

Call Functions
36
Call Functions
Adding an additional party to the call
1. To add another party to the conference call,
dial another person, again selecting Menu >
Conference.
Having a private conversation with a
party
1. To do this you will need to split the conference
call up. With the conference call running, select
Menu > Private.
2. Select the party with whom you wish to have the
private conversation and press the Action key.
Placing a call on speakerphone
1. Whilst in a call, select Menu > Speakerphone
On. The speakerphone is activated.
2. To switch the speakerphone off, select Menu >
Speakerphone Off.
Special dialling requirements
Inserting a manual pause in a dialling
sequence
Calls to certain networks may require a pause
between the dialled digits. To do this:
1. From the Home screen, select Start >
Contacts.
2. Select the contact number in which you want to
insert a pause and select Menu > Edit.
3. Place the cursor where you want to insert the
pause.
4. Select Menu > Insert Wait. The letter w is
displayed where the manual pause will occur in
the dialling sequence.
5. Select Done.
NOTE: The conference call feature depends on
your Network Provider supporting it. Please
check with your Network Provider to ensure
you can use this feature.
n
NOTE: The speakerphone mode will not be
automatically enabled in your next call, even if
you left the function switched on in the
previous call.
n