Toshiba 23HLV84 - Manual (Page 21)

21
DVD Playback
Using the
TV/DVD
’s Features
Setting up
your TV/DVD
Connecting
your TV/DVD
Introduction
Appendix
Notes:
• If you wish to change the on-screen
language, follow the steps 1-3 on page 26.
• If no buttons are pressed for more than
approx. 60 seconds, the PC Monitor Menu
screen will return to normal Monitor screen
automatically.
• The PC Monitor Menu settings are not
effective for normal TV mode, DVD mode or
external input mode.
Picture adjustments in the PC mode
There are a number of picture settings you can adjust to optimize the
performance of the unit in PC mode.
Press MENU during PC mode.
The PC monitor Menu will appear on the upper left of the TV screen.
Each time you press MENU, the PC Monitor Menu will change as
follows:
When you are finished adjusting the picture, press EXIT.
Example: Adjust the contrast.
1. During PC mode, press MENU once. The Menu 1 appears on the
TV screen.
2. Press ▲ or ▼ to select CONTRAST.
3. Press or to adjust CONTRAST.
4. Press EXIT to return to normal viewing.
DESCRIPTION ABOUT EACH SETTING OPTION
BRIGHTNESS: To adjust the brightness of PC Monitor screen.
CONTRAST: To adjust the contrast of PC Monitor screen.
HOR POSITION: To adjust the horizontal position of the image on
the PC Monitor screen. Each video standard will
require a different value for this setting.
VER POSITION: To adjust the vertical position of the image on the
PC Monitor screen. Each video standard will
require a different value for this setting.
PHASE: This must be adjusted after the frequency has been
set to optimize picture quality.
CLOCK: To minimize any vertical bars or stripes visible on
the screen background.
AUTO ADJUST: When you select this and press ENTER, the HOR
POSITION and VER POSITION are adjusted
automatically. At the same time, your adjusted level
will be cancelled. If the result after the automatic
adjustment is not satisfying, manual correction is
possible.
RED/GREEN/BLUE: To adjust the color temperature of PC Monitor
screen.
Resetting your picture adjustments in the PC mode
The RESET function returns your picture quality adjustments to the
following factory settings:
Menu 1 Menu 2
Brightness .............. center (0) Red ......................... center (0)
Contrast .................. max (25) Green ...................... center (0)
Blue ......................... center (0)
To reset your picture adjustments:
1. Press MENU during PC mode.
2. Press
▲ or ▼ to highlight RESET, and then press .
POWER
1 2 3
4 5 6
7 8 9 0
TV(DVD) VCR CABLE
TV/DVD
100
CH +
CH –
EXIT/
CANCEL INPUT PIC SIZE
MUTE
JUMP CH RTN/ZOOM SKIP
REW/SEARCH FF/SEARCH PLAY
TV/VCR PAUSE/STEP
REC
STOP
SUBTITLE AUDIO
RETURN ANGLE REPEAT A-B
ENTER
VOL
CODE
VOL
+ –
SLEEP
PLAY MODE
MENU/
SETUP
RECALL/
DISPLAY
TOP MENU DVD MENU
Menu
Menu 1 Menu 2
Exit
Connecting
your TV/DVD
J5P00101A(E)P11-21 8/12/04, 11:24 AM 21