Toshiba 23HLV84 - Manual (Page 16)

16
Connecting a camcorder
This connection allows you to watch videos recorded on a camcorder.
You will need:
• one S-video cable
• one pair of standard audio cables
VHS Camcorder
Note:
For better picture quality, if your camcorder
has S-video, you can use an S-video cable
(plus the standard audio cables) instead of a
standard video cable.
Do not connect both a standard video cable
and an S-video cable at the same time, or the
picture performance will be unacceptable.
You will need:
• one set of standard AV cables
VIDEO AUDIO
L
R
OUT
VIDEO AUDIO
L
R
OUT
S-VIDEO
S-VIDEO
Side panel of
TV/DVD
S-VHS Camcorder
Rear lower left of TV/DVD
Connecting an audio system
This connection allows you to use an audio amplifier and external
speakers, and adjust the audio level using the TV/DVD’s remote
control.
To control the audio, turn on the TV/DVD and the stereo amplifier, and
turn off the TV/DVD's built-in speakers (see “Turning off the built-in
speakers” on page 44).
You will need:
• one pair of standard audio cables
Note:
To hear sound when using an external audio
amplifier, the volume of both the TV/DVD and
the amplifier must be set above 0 (zero).
For example, if the volume of the TV/DVD is
set to 0, you will not be able to hear any
sound, even if the volume of the amplifier is at
its highest level.
LINE IN
L R
Amplifier
Rear lower left of TV/DVD
Connecting
your TV/DVD
J5P00101A(E)P11-21 8/12/04, 11:24 AM 16