TANDBERG 7000 MXP - Manual (Page 26)

D1335403_T7000_MXP_User_Manual
26
2.4 System Configuration
The system must be configured for each installation. Configuration settings can be made via the
system menu. If an external IMUX or non-standard network is being used it may be necessary to
configure any associated external equipment.
Navigate through the menu system using the arrow keys and OK. Remember to press the Save
button on the bottom of each menu to save your changes. Press Cancel (x) to return to the
previous Menu. See next section for more information about how to use the menus and the
remote control.
General configuration:
1. Open the General Settings menu
Press OK to open the Main Menu (if it is not already open).
Select Control Panel and then select Administrator Settings. Select General to open
the General Settings menu.
2. Language
Press OK in the Language field and select the language you want to use from the list.
3. System Name
Enter a name in the System Name field using the number keys on the remote control,
as you would do with a mobile or cellular phone.
4. Dual Monitor
If you are using two monitors, set Dual Monitor to "On". If you are using one monitor,
set Dual Monitor to "Off".