TANDBERG 7000 MXP - Manual (Page 188)

D1335403_T7000_MXP_User_Manual
188
4.8.6.2 H.323 Settings
E.164 alias
This is the E.164 address of the system. The E.164 address is equivalent to a telephone number,
sometimes combined with access codes. Valid characters are 0-9,* and #. When using a
gatekeeper, the system will send a message to the gatekeeper containing both the E.164 address
and the H.323 ID of the system.
H.323 ID
The H.323 ID of the system may be specified here. The System name is used if no H.323 ID is
entered.
H.323 Call Setup
Direct An IP-address must be used in order to make a H.323 call. The system will not
use a gatekeeper or CallManager
Gatekeeper The system will use a gatekeeper to make a H.323 call.
Call
Manager
The system will use a CallManager to make a H.323 call.
Gatekeeper Discovery
Auto The system will automatically try to register on any available gatekeeper. If a
gatekeeper responds to the request sent from the codec within 30 seconds this
specific gatekeeper will be used. If no gatekeeper responds, the system will not
use a gatekeeper for making H.323 calls and hence an IP-address must be
specified manually.
Manual The system will use a specific gatekeeper identified by Gatekeeper IP-address.
Gatekeeper IP
This is the gatekeeper IP-address that is used if you specify H.323 Call Setup: Gatekeeper and
Gatekeeper Discovery: Manual.