TANDBERG MSE 8350 - Manual (Page 12)

8
Configuring the IP GW blade
Step one: Log in to the IP GW blade
All administration of the IP GW blade is performed through the web interface.
To log in to the web interface of the IP GW blade:
1
Log in to the Supervisor’s web interface.
2 Go to
Hardware > Blades
and click the IP address of the IP GW blade.
3 Click
Click here to log in
, and then click
Change log in
and enter the user
name
admin
with no password.
Step two: Configure an H.323 gatekeeper or SIP registrar
(optional)
If you have H.323 endpoints, using an H.323 gatekeeper can make it easier for callers
to make their call. You can configure the IP GW blade to use an external gatekeeper
or its own built-in gatekeeper.
If you have SIP endpoints, using a SIP registrar can make it easier for callers to make
their call.
To configure the use of an H.323 gatekeeper, go to
Settings > H.323
To configure the use of a SIP registrar, go to
Settings > SIP
For more information refer to the online help topics: “Configuring H.323 settings”
and “Configuring SIP settings”.
Codian recommends that you change the admin account to use a
password as soon as possible. To do that, go to
Users
, click the
admin
link, and provide the required user information.
i