beautypg.com

Presets – TC Electronic NM-1 Nova Modulator User Manual

Page 29

background image

PRESETS

29

Bank mode

Bank mode allows you to store up to nine banks
holding two presets each. This is the mode to use if
you have a number of different songs that require
dedicated presets.

Selecting Bank mode:

Enter Calibration mode by holding the MANUAL
button for one second. The PRESET button’s LED
should now be flashing. If it is steady lit, press the
PRESET button once.

Exit Calibration mode by pressing any button other
than PRESET.

The 7-segment display now shows the current preset
bank. For each of the nine banks, you can store two
presets. The presets are dedicated to the PRESET and
MANUAL buttons.

Preset #1

Preset #2

Alternating between the two presets in a bank can be
done in two ways:

Press the PRESET button (for preset #1) or the
MANUAL button (for preset #2) or

Press and hold the ON/OFF button for approx. one
second.

Selecting banks can also be done in a couple of ways:

You can press the PRESET button several times to
step through the banks or

You can press the TAP/TEMPO switch once and
immediately thereafter the ON/OFF button multiple
times.

See also the example on how to select presets using
the TAP TEMPO and ON/OFF switches on pages 10-11.

Bank mode differs from Preset mode in the
following ways:

- when the MANUAL buttons LED is lit it means that
preset #2, in the current bank is recalled. Unlike in
Manual mode – you can not rely on the position of the
knobs as an indication of the current parameter values.