TC Electronic NM-1 Nova Modulator - Manual (Page 12)

8 – TIME/FILTER Knob
The function of this knob depends on the selected
effect type:
Chorus:
Chorus delay time
Tri-Chorus: Chorus delay time
Flanger: Flanger delay time
Phaser: 4, 8 or 12 filters (indicated in the display)
Tremolo: Subdivision (indicated in the display)
Vibrato: Ramp time*
* Ramp: This is a function available in Variation mode that,
when activated, gradually increases the depth of the Vibrato,
similar to what a vocalist does.
9 – SHAPE/FEED/TRI-MIX Knob
The function of this knob depends on the selected
effect type:
Chorus:
Hi-Cut
Tri-Chorus: Chorus mix (amount)
Flanger: Flanger Feedback
Phaser: Phaser Feedback
Tremolo: Pulse-width
10 – LFO SYNC Button
The LFO Sync function syncs the speed of effect
Engines A and B. With LFO Sync activated (LED lit),
tapping the tempo on the TAP TEMPO switch will sync
both Engines to this tapped tempo. For the Tremolo
effect it is possible to select the sub-division using the
TIME knob. This is explained further in the “Effects”
chapter in this manual.
11 – Display
The 7-segment display may indicate different
parameters:
•
Either the current preset number or
• The number of filters (for the Phaser) or
• The Subdivision (for the Tremolo)
The dot in the lower right corner can indicate:
•
When a knob is placed at the currently stored
position
• When the pedal is in preset toggle mode
OVERVIEW
12