TC Electronic NM-1 Nova Modulator - Manual (Page 14)

controlled either by Engine A’s SPEED knob or by
tapping the TAP TEMPO switch. When you set the
speed using Engine A’s SPEED knob, the SPEED LED
in Engine A indicates the tempo. When you set the
tempo by tapping it with the TAP TEMPO switch, the
TAP TEMPO switches’ LED indicates the tempo.
In LFO Sync mode, the SPEED knob of Engine
B is inactive!
Chorus
Introduction
The basic idea of a Chorus effect is to split the signal
and pitch modulate one of the signals slightly, then mix
the two signals again. In this “regular” type of Chorus,
the Chorusing effect occurs when the pitch modulated
signal is played against the dry signal.
DEPTH Knob
Use the DEPTH knob to specify the intensity of the
effect. The more you turn the knob clock-wise, the more
“out of tune” the modulated part of the signal will be.
EFFECT TYPES: CHORUS
14