Toshiba TDP-T9 - Manual (Page 17)

17
Preparations
Names of each part on the control panel and remote control
Control panel Remote Control
Name : Main Function
Control panel
(1) ENTER button : Accepts the selected mode.
(2) MENU button : Displays menus. p.32
(3) KEYSTONE button : Adjusts keystone distortion.
(4) ON/STANDBY button : Turns the power on/off (standby). p.26
(5) INPUT button : Selects input. p.27
(6) Selection button : Menu selections and adjustments. p.32
(7) LAMP indicator : Displays lamp mode. p.26
(8) POWER indicator : Displays power on/off mode. p.26
(9) TEMP indicator : Lights when internal temperature too high.
p.41
Remote control
(1) ENTER button : Accepts the selected mode.
(2) MENU button : Displays menus. p.32
(3) KEYSTONE button : Adjusts keystone distortion.
(4) ON/STANDBY button : Turns the power on/off (standby). p.26
(5) INPUT button : Selects input. p.27
(6) Selection button : Menu selections and adjustments. p.32
(10) LASER button : Shows a laser pointer.
(11) AUTO SET button : Sets up analog input from computer.
(1)
(2)
(3)
(4)
(5)
(6)
(9) (8) (7)
POWER
KEYSTONE +
KEYSTONE - (3)
CAUTION
• Do not look into the laser light
source of the remote control or
direct the laser pointer toward a
person or a mirror.
• Handling and adjusting other
than described here may lead to
dangerous exposure to laser.
Remote control
transmitter
Laser light
source
( 12)
( 11)
( 5)
( 2)
( 6)
( 18)
( 14) ( 14)
( 1)
( 4)
( 10)
( 15)
( 16)
( 13)
( 3) (19)
Warning
label
Battery
cover
( 17)