Thermador CIT304E - Manual (Page 17)

17
6. Touch the power key Ý Confirmation tones will sound. The power limit has
been activated.
The power limit on the cooktop can be deactivated.
1. Proceed in the same way as with the activation.
2. Touch the programming area until the symbol _ lights up on each of the element
displays.
3. Touch the power key Ý. Confirmation tones will sound. The power limit will
have been deactivated.
Problem Possible cause Advice/Way of rectifying it
You try to choose a heat setting for an element but
cannot. You have exceeded
the total power limit of
the cooktop. Deactivate the Power - Management function.
Increase the cooktop's power limit.
Switch off or reduce the heat setting of the
elements that are working.
You try to activate the Powerboost function but
cannot. You have exceeded
the total power limit of
the cooktop. Deactivate the Power - Management function.
Turn off the elements that are working.
Turn off the display beep
The display beeps when a key is touched. This setting can be turned off:
Turn the cooktop on at the power key.
1. Set all elements to temperature level 3.
2. Turn the elements off one after another, from right to left (see picture).
3. Touch the power key for at least 5 seconds. The display will beep to confirm the
change.
To turn the display beeps back on again, repeat the steps above.
Deactivate the power limit
Indicator lights