Thermador CIT304E - Manual (Page 13)

13
Cooking
This section explains how to adjust the elements. In the table, you can find
temperature settings and cooking times for various foods.
Use the slider panel to select the desired temperature.
Heat setting 1 = lowest level
Heat setting 9 = highest level.
The temperature range is a continuous scale from 1 to 9. The level is indicated by a
number or a number with a decimal point after it (i.e., 2 or 2.) 2. is halfway between
2 and 3.
The cooktop must be turned on.
1. Select the element by touching the element symbol.
The temperature level display flashes 0.
2. Within 5 seconds, slide your finger across the slider panel until the desired heat
setting appears in the element display.
Heat setting 1 = lowest level
Heat setting 9 = highest level
After 5 seconds, the elements display lights up continuosly. The element is
turned on.
1 . Touch the element display once. The display flashes 0.
2 . Set the new temperature level within 5 seconds.
If the selection is not made within 5 seconds, the element will shut off.
Select the element. k flashes in the heat setting display. After approximately 5
seconds, the element turns off and the hot surface indicator lights up.
The slider panel
Set the cooking
temperature as follows:
Changing the heat setting
Switching off the element