Tools needed, Materials needed – Thermador 9000039271 User Manual
Page 2
2
TOOLS NEEDED
Hammer
Hole
Saw
Pipe
Wrench
Tape
Measure
Slot
Screwdriver
Phillips
Screwdriver
Torx
Screwdriver
Wire
Cutter
Wire
Stripper
Drill
Level
Adjustable
Wrench
Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1 ground, insu-
lated copper conductors.
Hot Water Supply Line - Minimum 3/8” O.D. copper tubing or metal braided
dishwasher supply line.
Shut-off valve and fittings appropriate for hot water supply line (copper
tubing/compression fitting, or braided hose).
90° elbow with 3/8” N.P.T. male threads on one leg, and sized to fit your
water supply line (copper tubing/compression fitting, or braided hose) on the
other leg.
Teflon tape or other pipe thread compound to seal plumbing connections.
UL listed conduit connector or strain relief.
MATERIALS NEEDED
(Additional materials may be required to comply with local codes.)