Telex IP-223 User Manual
Page 65

67
Per Line Setup Window—Local, Tone, and Console Mode Configuration
ANI Suffix Field
The ANI Suffix field identifies a 0 to 3 digit suffix is appended to the end of the ANI received. For example, if you have a 
suffix 123 and the ANI 9876 is received, the IP-223 sends 9876123 to the consoles. This is useful if two (2) different lines 
have duplicate ANI IDs.
Digit Duration Field
The Digit Duration field identifies the length of time, in ms, the digit tone is decoded when it is active for the signaling type 
selected in the Tone Type drop down menu.
The range for this field is 0 to 100ms.
Interdigit Duration Field
The Interdigit Duration field identifies the length of time, in ms, between the digit tones for the signaling type selected in the 
Tone Type drop down menu.
The range for this field is 0 to 100ms.
NOTE:
Some radio systems require an extended first tone, to allow time to activate the receivers.
Pause Duration Field
The Pause Duration field identifies the length of time, in ms, allowed between received groups for the signaling type selected 
in the Tone Type drop down menu.
The range for this field is 0 to 100ms.
Preamble Duration Field
The Preamble Duration field identifies the length of time, in ms, the first tone is sent for the signaling type selected in the 
Tone Type drop down menu.
The range for this field is 0 to 100ms.
Group Digit Field
The Group Digit field identifies the group digit. The group digit is a wild card that can represent any digit. Placing a group 
digit within a filter allows any digit appearing at that location in the tone string to pass through the filter.
Field values can be 0 - 9 or A - F. The default is A.
Repeat Digit Field
The Repeat Digit field identifies the digit that separates two digits sent back to back. On occasion, radio system messages 
require two of the same digits to be entered back to back. Use of repeat digits delimits tone duration ensuing continuous 
transitions. 
The default for this field is E.
ANI Decoder # Field
The ANI Decoder # field lists in sequential order the available ANI Decoders.
